Answer ( 1 )


    How To Get A Screw Out That Keeps Spinning: HOW DO YOU REMOVE A SCREW THAT KEEPS SPINNING?

    If you’ve ever encountered a screw that just won’t budge no matter how much you turn it, then you’re not alone. It’s one of the most frustrating problems DIY enthusiasts and professionals alike face when repairing or upgrading anything from furniture to cars. But fear not! In this blog post, we’ll explore several effective methods for removing a spinning screw and getting your project back on track. So grab your tools and let’s dive in!

    What Causes Screws to Keep Spinning?

    There are a few things that can cause screws to spin. One common culprit is the head of the screw being too tight on the screwdriver shaft. Over time, the shaft can actually start to turn, and the screw will keep spinning even when you try to remove it. Another cause is debris or grit getting caught in between the screw and the screwdriver blade, which causes friction. If this happens repeatedly, eventually enough friction will build up to cause the screw to spin. Finally, sometimes screws become loose over time and tend to turn with each movement. In these cases, it may be necessary to remove all of the screws around an area in order for them to be fixed properly.

    How to Fix a Screw That Keeps Spinning

    There are a few different ways to fix a screw that keeps spinning. One way is to use a vise grip and unscrew the screw from the object it’s attached to. Another way is to use pliers and grasp the screw near the head, then twist it off. If neither of these methods work, you may have to remove the screw using a wrench or another tool.

    How to Remove a Screw That Keeps Spinning

    If you have a screw that keeps spinning, it is most likely because of the head on the screw getting worn down. This can be caused by over-tightening the screw or by using the wrong type of screwdriver for the job. To remove a screw that keeps spinning, start by identifying the type of screws and driver needed. If the screw is an Allen key screw, use an Allen key socket to remove it. If the screw is a phillips head screw, use a Phillips head driver. For screws with mushroom heads, use a specialised driver called a mushroom head driver. Note that some screws have multiple types of heads – for example, there are both Allen key and Phillips head screws with mushroom heads. Once you have identified which type of driver is needed, carefully insert it into the correct hole on the screwdriver and turn it until the screw comes out smoothly.


    If you’re having trouble removing a screw that keeps spinning, there are a few things to try. First, check to see if the head of the screw is rounded or sharp. If it’s sharp, you may be able to use a manual dexterity tool like a wrench or pliers to twist it off. However, if the head is rounded, your best bet may be to try using an electrician’s drill bit removal bit. Drill slowly and steadily at decreased speeds until the bit breaks through the screw shaft and starts to spin freely. Keep in mind that this will take longer than using simple tools; however, it should work much more reliably with less risk of damage.

Leave an answer